Professional Fence Installation in Burlington, NC

Fence
Company in

Burlington, NC

Fence Works is based just down the road in Graham, so Burlington is home turf. We build wood, vinyl, aluminum, and chain link fences for homes in established neighborhoods like Forestdale and Brookwood, lake-side lots in Mackintosh on the Lake, and newer subdivisions across west Burlington. We handle the city fence permit details, set every post properly, and most estimates go out the same day you reach out.

Why Burlington Homeowners Choose Fence Works

Burlington homeowners have plenty of fence companies to choose from. The difference shows up a few years later, when the posts are still straight, the gates still latch, and the contractor still picks up the phone. That is the standard we build to.

Fence measurements and estimate documents being reviewed

Local and Fast

Our shop is minutes away in Graham. That means quick site visits, same-day estimates in most cases, and a crew that can get back to you fast if anything ever needs attention.

Fence hardware being fastened to an accurately set panel

Posts Set to Last

We set posts one day and build the next, so concrete cures before the fence takes any load. It is a small step that keeps lines straight through Alamance County clay and storms.

Experienced installer building a residential fence

Permit-Ready Plans

Burlington requires a fence permit for new fences and for replacing eight linear feet or more. We lay out the route, height, and material so the application and the build match.

Calculator and clearly organized fence pricing worksheet

Clear, Itemized Pricing

You see what goes into the price: footage, gates, removal, and material. If a different material would serve you better for less, we will tell you.

Installer working at an orderly residential fence site

Clean Job Sites

We protect lawns and beds where we can, haul off old fencing and debris, and leave the yard ready for kids and pets the day we finish.

Homeowner enjoying a completed fence project

Financing Available

Financing is available through Avvance for qualified homeowners who prefer predictable monthly payments over a single upfront cost.

Fencing Services in Burlington, NC

Fences for Burlington backyards, pools, pets, and property lines.

Burlington has everything from mid-century homes on mature lots to new construction near the interstate. We match the material to the job the fence has to do, then account for slope, footage, gates, and upkeep before we price it.

Wood privacy fence stepped along a graded Burlington backyard with a finished cap rail

Wood Fencing

The classic choice for natural beauty and solid privacy. We use premium cedar or pressure-treated pine to ensure longevity against the elements.

Styles: Privacy, Shadowbox, Board-on-Board

Best for: Residential privacy, traditional curb appeal

Tan vinyl privacy fence enclosing a subdivision backyard near Burlington, NC

Vinyl (PVC) Fencing

A low-maintenance solution that never needs painting or staining. Engineered to resist fading, cracking, and peeling for decades — and one of the most commonly HOA-approved materials in Burlington communities.

Styles: Full Privacy, Semi-Privacy, Picket, Ranch

Best for: Busy homeowners, modern aesthetics, HOA-friendly designs

Black aluminum pool fence enclosing an in-ground pool and patio

Aluminum & Metal Fencing

Elegant ornamental designs with powder-coated finishes that resist rust and corrosion. Pool-code compliant options available for families who need to pass inspection.

Styles: Ornamental Iron, Aluminum, Pool Code Compliant

Best for: Pool safety, pet containment, open sightlines

Black chain link fence and walk gate securing a wooded backyard

Chain Link Fencing

Durable and cost-effective, available in galvanized or vinyl-coated (black or green) with optional privacy slats.

Styles: Galvanized, Vinyl-Coated (Black/Green), Privacy Slats

Best for: Large backyards, commercial lots, dog runs

Wood privacy fence with a double drive gate and heavy black hardware

Gates & Access

Custom walk-through and driveway gates to match any fence style. Included free on select projects.

Replacement wood privacy fence and gate rebuilt beside a Burlington home

Repairs & Storm Response

Fence down after a storm? We respond fast and work directly with insurance companies to get you back up and compliant.

Black aluminum fence wrapping the corner of a subdivision lot near Burlington, NC

Getting Your Burlington Fence Permit

The City of Burlington requires a fence permit before a new fence goes in, and its Unified Development Ordinance also requires one to replace or upgrade eight linear feet or more of an existing fence. The Planning Department reviews the fence location, height, and material against the ordinance.

In residential districts, fences between the house and the street are generally limited to four feet, and up to eight feet elsewhere on the lot. Fences taller than six feet need engineered drawings and a building permit. We plan the fence around these limits from the first measurement.

Local reference: City of Burlington Development Review

1

Confirm City or County

Some Burlington mailing addresses sit outside city limits. Check whether the City of Burlington or Alamance County reviews your property before applying.

2

Map the Fence Line

Show the full route, gates, and distance to property lines and the street. Fences can cross public easements but cannot run along inside them.

3

Set Height and Material

Keep street-side runs to four feet and back-yard runs to eight. If your HOA has its own standards, match those before ordering material.

4

Permit, 811, Then Build

Once the permit and any HOA approval are in hand, we request NC 811 utility marking and schedule installation around the approved fence line.

A clear plan means the permit, the estimate, and the crew all describe the same fence. That is how a Burlington project stays on schedule.

Start My Burlington Fence Plan

Common Questions from Burlington, NC Homeowners

These are the questions Burlington homeowners ask most before a fence goes in. If yours is not here, call us and we will give you a straight answer.

Do I need a permit for a fence in Burlington, NC?

Yes, inside city limits. Burlington requires a fence permit for new fences, and its ordinance also requires one to replace or upgrade eight linear feet or more of an existing fence. Fences over six feet tall also need engineered drawings and a building permit.

Rules can change, so confirm the current requirements with the Burlington Planning Department at 336-222-5110 before you order material.

How tall can a fence be in Burlington?

In residential districts, fences between the front of the house and the street are generally limited to four feet. In all other locations, including most back yards, the limit is eight feet.

Corner lots, through lots, and sight triangles at intersections have extra limits, so we check the street frontage on every property before recommending a height.

Can I put a fence in a utility or drainage easement?

Burlington allows a fence to cross a public easement and run along its edge, but not to run along inside it. A gate may be needed so maintenance crews can get through.

If a fence inside an easement is damaged during utility work, the homeowner is responsible for repairs. We check the plat for easements before we lay out the line.

Do I need HOA approval too?

If your neighborhood has an HOA, its architectural approval is separate from the city permit. Many Burlington subdivisions set rules for material, color, height, and which side faces out.

Get written HOA approval before installation. We can provide the fence details your HOA usually asks for.

How much does a fence cost in Burlington?

Price depends on linear footage, material, height, gates, slope, and whether an old fence has to come out. Chain link usually costs the least per foot, while vinyl and aluminum cost more upfront but need less upkeep.

The fastest way to a real number is a free on-site estimate. Most Burlington estimates go out the same day.

How long does installation take?

Most residential fences take one to three days on site once permits are approved. On wood projects we set posts first and let the concrete cure before building the panels.

Permit review, HOA approval, and NC 811 utility marking come first, and we tell you the full timeline up front.

Get a Free Quote in Burlington

Serving Homeowners Across Burlington, NC

Fence Works serves all of Burlington, from the neighborhoods around downtown to the lake communities and new subdivisions on the west side. We also cover nearby Alamance and Guilford County towns.

  • Downtown Burlington
  • Forestdale
  • Brookwood
  • Mackintosh on the Lake
  • Glen Raven
  • West Burlington
  • Elon
  • Gibsonville
  • Haw River
  • Whitsett

Not on the list? Send us your address and we will confirm we cover it.

Explore nearby service areas: Graham, Mebane, Durham, Apex.

White vinyl privacy fence along a tree line behind a home near Burlington, NC
Wood privacy fence and gate along a tree line at a Burlington, NC area home

A Burlington Fence Built By Your Neighbors

We live and work right next door, so our reputation in Burlington is built one yard at a time. That is why we take the time to plan the fence right, set the posts properly, and stand behind the work.

Whether you need privacy, a safe place for the dog, a pool barrier, or a fence that finally replaces the old one, you will know exactly what is being built and what it costs before we start.

Tell Us About the Yard. We Will Handle the Rest.

Share your Burlington address, the type of fence you have in mind, and what it needs to do. If you have a survey or HOA guidelines, mention them so we can start with the right details.

Call Our Office

(336) 534-8664

Visit Us (By Appointment Only)

2552 Saxapahaw-Bethlehem, Church Road,
Graham, NC, 27253

Get My Burlington Fence Quote